JVC TD-V711 - Specifications

2) Specifications
Type
Track system
Tape speed
Frequency response
S/N ratio
Improvement of MOL
Wow and flutter
Channel separation
Crosstalk
Harmonic distortion
Heads
Motors
: Stereo cassette deck
: 4-track, 2-channel
: 1-7/8 inch/sec (4.8 cm/sec)
: (— 20 dB recording)
Metal tape;
10—22,000 Hz
15—20,000 Hz (+3 dB)
Chrome tape;
10—20,000 Hz
15— 18,000 Hz (+3 dB)
Normal tape;
10—20,000 Hz
15—18,000 Hz (+3 dB)
: 59 dB (S=1 kHz, K3=3%
N=A-weighted, Metal tape)
The S/N is improved by about
15 dB at 500 Hz and by max.
20 dB at 1 kHz ~ 10 kHz with
Dolby C NR on and improved
by 5 dB at 1 kHz and by 10 dB
at above 5 kHz with Dolby B
NR on.
: 4 dB at 10 kHz with Dolby C
NR on.
: 0.022% (WRMS)
: 40 dB (1 kHz)
: 65 dB (1 kHz)
:K3; 0.5% THD; 1.0%
(metal tape, 1 kHz O VU)
: Erase (2-Gap Ferrite) x 1,
Record (Sen-Alloy) x 1,
Playback (Amorphous Ferrite)
x 1
: Pulse servo direct drive
motor for capstan x 1
DC motor for reel x 1
DC motor for mechanism drive
x 1
Fast forward/Rewind
time
Imput terminals
CD DIRECT
(x 1 circuit)
DIRECT
(x 1 circuit)
LINE IN
(x 1 circuit)
Output terminals
LINE OUT
(x 1 circuit)
PHONES x 1
Other terminals
Power requirement
TD-V711A/B/E/G
TD-V711C/J
Power consumpiton
Dimensions
(W x H x D)
Weight
Accessories
TD-V711 A/B/C/E/G/J/U
: Approx. 95 sec. with C-60
cassette
: Min. input level; 80 mV
Input impedance; 50 kQ
: Min. input level; 80 mV
Input impedance; 50 kQ
: Min. input level; 80 mV
Input impedance; 50 kQ
: Output level; 300 mV
Output impedance; 600 2
: Output level; O~ 1 mW/8 Q
Matching impedance
82 — 1k2
: COMPU LINK-1/SYNCHRO x 2
: AC240/220/120 V, 50/60 Hz
: AC 120 V, 60 Hz
:18W
>475 x 132 x 336mm
(18-3/4"" x 5-1/4" x
13-1/4’’)
: 8.3 kg (18.4 Ibs)
: Pin plug cord .............:.c08 2
Remote cable ...............06 1
Design and specifications are subject to change without
notice.
(No. 4294) 3