To Next PageTo Next Page
Need help?Do you have a question about the JVC TD-W254 and is the answer not in the manual?
Tape Specifications| track system | 4-track, 2-channel |
|---|---|
| tape speed normal | 4.8 cm/sec (1-7/8 inch/sec) |
| tape speed high | 9.5 cm/sec (3-3/4 inch/sec) |
Frequency and Sound| frequency response Type IV tape | 20–17, 000 Hz |
|---|---|
| s/n ratio | 58 dB (S = 315 Hz, k3 = 3%, N = A-weighted, Type IV tape) |
| wow and flutter | 0.08% (WRMS), ±0.2% (DIN/IEC) |
Power| power requirement B version | AC 230 V, 50 Hz |
|---|---|
| power requirement J version | AC 120 V, 60 Hz |
| power consumption on | 17 W |
Input/Output| line in input sensitivity | 80 mV (0 VU) |
|---|---|
| line out output level | 300 mV (0 VU) |
| phones output level | 0.3 mW/8 Ω (0 VU) |
Dimensions and Weight| dimensions | 435 x 139 x 331 mm (W x H x D) |
|---|---|
| weight B version | 5.0 kg |
| weight J version | 4.8 kg |
Section for recording model and serial numbers for future reference.
Explains caution symbols and warnings about electric shock, fire, and moisture.
Specific instructions for UK mains supply and USA FCC regulations.
Welcome message and advice on reading the manual for optimum performance.
Detailed safety precautions for handling the unit and power cord.
Lists features like double cassette, full logic, Dolby HX PRO, noise reduction, DDRP, etc.
Advice on placement, temperature, and humidity for optimal operation.
Instructions for cleaning, tape handling, and auto tape selection.
Guidance on connecting the deck to a stereo amplifier and using Compu Link.
Step-by-step instructions for loading a cassette into the deck.
Detailed labeling and description of the unit's controls and indicators.
Instructions for playing cassettes on Deck A and Deck B.
Explanation of auto reverse function and continuous playback modes.
Step-by-step guide for recording audio onto cassette tapes.
Guidance on setting optimal recording levels for different tape types.
How to create non-recorded sections during recording.
Explanation of noise reduction and headroom extension systems.
Overview of the system for automatic component operation.
Instructions for dubbing tapes between decks and synchro recording.
Details on DDRP recording and automatic source selection via Compu Link.
Procedures for editing tapes and demagnetizing heads.
Instructions for cleaning components and resolving common issues.
Detailed technical data including frequency response, S/N ratio, and dimensions.
