Need help?Do you have a question about the JVC TD-W220 SERIES and is the answer not in the manual?
Identifies and describes the function of various controls and buttons on the deck.
Steps for disassembling and removing the cassette mechanism assemblies for both Deck A and Deck B.
Detailed steps for removing specific mechanical sub-assemblies like heads, motor, and pulleys.
Step-by-step guide for adjusting mechanism parameters like speed, torque, and auto-stop.
Detailed procedures for electrical calibration of gain, frequency response, and bias.
General| Type | double cassette deck |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Tape Speed | 4.8 cm/s |
| Heads | 2 x Erase |
| Motor | DC servo motor |
| Frequency Response (Normal Tape) | 30 Hz - 14 kHz |
| Frequency Response (Chrome Tape) | 30Hz to 16kHz |
| Frequency Response (Metal Tape) | 30Hz to 17kHz |
| Wow and Flutter | 0.08% WRMS |
| Inputs | Line In (RCA) |
| Outputs | 1 x line, 1 x headphones |
| Power Supply | 220V, 50Hz |
| Input | Line In (RCA) |
To Next Page
