JVC TD-WS305TN A User Manual

RECORDING
Operate
in
the
order
of
the
numbers
in
the
illustration.
;
e
Make
sure
the
safety
tab
of
the
cassette
has not been broken off.
Deck B only
Nur
Deck
B
Platine
B
seulement
Alleen
deck
B
Magnetdofono
B
solamente
QO
_x2
2]
DOLBY
NR
REVERSE
MODE
e
B
OFF
C
>
Dect
+
<
_
ep
3)
—_
@
Press
the
POWER
switch
to
set
to
ON
(=).
@ Load a cassette for recording.
@ Set the DOLBY NR switch as required.
@
Select
the
REVERSE
MODE.
(See
page
31.)
@ Select the side to be recorded.
@
Press
the
i
PAUSE
button
and
O
REC/REC
MUTE
button
(record-pause
mode}.
REC lights and PLAY indicator flashes.
@
Adjust
the
recording
level.
(See
page
25.)
@ Press to “0000”.
©
Press
the
PLAY
button
to
start
recording.
WARNING
It may be unlawful to record or playback
copyrighted material without the consent
of the copyright owner.
10 (No. 4325)
DDRP (Dynamics Detection Recording
Processor) recording
DDRP recording is performed with suitable
JVC CD players and the recording level
adjustment is performed automatically.
Since recording tevel adjustment is performed
automatically for different types of tape (nor-
mal, CrOz and metal), the adjustment of
INPUT LEVEL control is not required.
Read the instruction book of your CD player
carefully.
Erasing
When recording on a prerecorded tape, the
previous recording is automatically erased
and only the new program is recorded on the
tape.
To erase a tape without making a new record-
ing...
Follow the section “RECORDING” but in step
@, set the INPUT LEVEL contro! to MIN.
|
DDRP (Dynamics Detection Recording
Processor) recording
The DDRP function makes possible fully
automatic recording when used with a suit
able JVC CD player. When the DDRP button
of a suitable JVC CD player is pressed, the
’ recording level is first adjusted automatically,
then recording starts; it is not necessory to
start recording by the normal procedure.
Notes:
¢ Synchronized recording or DDAP record-
ing stops automatically when the CD play-
er stops playing.
e Synchronized recording does not start
except when the record-pause mode is
set by simultaneously pressing the O
REC/REC MUTE and &l PAUSE buttons
in the stop mode.
¢ To cancel synchronized recording or
DDRP recording, press the STOP button
of the CD player or cassette deck.
¢ The source is locked to the CD position
during synchronized recording or DDRP
recording to avoid accidental stops or
switch-over to another component. To
switch over the components, cancel syn-
chronized recording or DDRP recording
first.
The INPUT LEVEL control does not function
during DDRP recording.

JVC TD-WS305TN A Specifications

General

Brand	JVC
Model	TD-WS305TN A
Category	Cassette Player
Language	English