(No.MB362)1-35
3.4.11 Removing the speaker net
(See Figs.16 and 17)
(1) From side of the speaker main body, insert the tip of the
flat-bladed screwdriver or similar tool into the space be-
tween the speaker main body and speaker net, and lift the
speaker net little by little to remove. (See Fig.16)
Note:
To prevent damaging the speaker net and speaker main
body, insert cushioning plates etc. and below the tip of
the flat-bladed screwdriver or similar tool.
(2) From right side of the speaker main body, release the nine
joint c, and take out the speaker net from the speaker main
body. (See Fig.17)
Fig.16
Fig.17
Speaker net
Flat-bladed
screwdriver,etc.
Chshioning
plate,etc.
Speaker main body
Speaker net
Joint c