JVC TH-D7B - Page 27

(No.MB638)1-27
Tray Open/Close
Upper:Laser current value
(BACKUP value, Real measured value)
Lower:Jitter value
Release at each step
Disc playback
7
Back to STEP 2
Release the TEST MODE
*1 Mode toggle done by press [MENU] key.
*2 STEP3 are only for DVD-AUDIO or VR correspondence model.
CEHCK
Press a [MENU] key of
the remote controller
Press a [STOP] key of
the main body or remote
controller
Press a [PLAY] key of
the main body or remote
controller
Press a [OPEN/CLOSE]
key of the main body or
remote controller
Press a [POWER] key of
the main body
Press a [ 10] key of the
10key on remote controller
BCA READ CHECK
0:During BCA READ
1:BCA READ OK
2:BCA SEEK ERROR
3:BCA READ ERROR
4:SPINUP adjust ERROR
Disc stop, LD-OFF
Press a [6] key of the 10
key on remote controller
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : Real measured value
DVD_SL x1 jitter
measurement mode
Press a [9] key of the 10
key on remote controller
Upper : 0
Lower : Temperature sensor value
Temperature sensor
(AD value) indication
Press a [10] key of the 10
key on remote controller
Upper : 0x00-0x06(measure at VT501)
Lower : Jitter value
DVD-DL(parallel,opposite)
Search & jitter
measurement of the
specified position of
DVD-SL
Press a [4] key of the 10
key on remote controller
Press a [5] key of the 10
key on remote controller
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
CD_LD lights and laser
current is displayed
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
DVD_LD lights and laser
current is displayed
132465798 10 1211 13
STEP Operation Movement Remarks
FL(LCD)indication
Press a [8] key of the 10
key on remote controller
Content of BACKUP
memory(0x00-0x63)
indication (FWD)
Upper Byte1 : Display option
0x00 : BACKUP area
0xFF : permanent area
Upper Byte2 : BACKUP memory address
(0x00-0x63)
Lower : Content of BACKUP memory
Press a [0] key of the 10
key on remote controller
Upper : 0x00-0x0C
Lower : 0
MONITOR output switch
1: SRV_MONI_CIRC
2: SRV_MONI_SERVO
3-5: SRV_MONI
_ANALOG
6-7: SRV_MONI_DRC
8-11: SRV_MONI
_SERVO_JIG
12: SRV_MONI
_DEFAULT