What to do if there is no sound from JVC TH-U1?
If you're not getting any sound from your JVC DVD player, first ensure that the speaker cords are properly connected. Also, verify that you've selected the correct source on your device.
How to fix no picture on JVC TH-U1?
If there is no picture displayed on the TV screen when using your JVC DVD player, check that the SCART cable is connected correctly. Also, ensure that you are using a playable disc or file.
How to turn on JVC TH-U1 if it doesn't power on?
If your JVC DVD player isn't turning on, make sure the power cord is correctly connected.
Why JVC TH-U1 DVD Player remote control not working?
If the remote control for your JVC DVD player isn't working, the batteries may be dead. Try replacing them. Also, make sure that direct sunlight isn't shining on the remote sensor.
What to do if JVC TH-U1 video and audio are distorted?
If the video and audio from your JVC DVD player are distorted, the disc might be scratched or dirty. Try replacing or cleaning the disc. Also, if a VCR is connected between the unit and the TV, connect the JVC DVD player and TV directly.
What to do if JVC TH-U1 DVD Player remote control doesn't work as expected?
If your JVC DVD player remote control isn't working as expected, ensure that the remote control mode is set for the desired source by pressing one of the source selecting buttons before operation.
How to adjust picture size on JVC TH-U1 DVD Player?
If the picture from your JVC DVD player doesn't fit the TV screen, set “MONITOR TYPE” properly.
How to fix sound distortion from optional speakers on JVC DVD Player?
If the sound from the optional speakers is distorted on your JVC DVD player, set the speaker position mode to “S. SPK R” when you connect optional speakers.
Lists compatible DVD, CD, VCD, and SVCD formats.
Lists supported file extensions for audio, image, and video.
Details the buttons and functions of the remote.
Connects supplied speakers and subwoofer for basic layout.
Guides for connecting separately purchased speakers.
Describes basic and optional speaker positioning.
How to connect the system to a television.
Guide for connecting USB mass storage devices.
How to turn the system on and standby.
Choosing between DVD, USB, FM/AM, or TV audio.
Adjusting audio levels and muting.
Configuring for different speaker layouts.
Adjusting individual speaker output and stereo balance.
Steps to start playback of discs and USB files.
How to select and use different surround sound settings.
Details on Auto Surround, Dolby, and DTS modes.
Navigating files with the file control screen.
How to resume playback from a stopped point.
Changing subtitle languages.
Changing audio tracks or languages.
Adjusting picture characteristics like brightness, contrast.
Creating custom playback sequences for discs.
Repeating selections or the entire disc.
Repeating a specific segment of a disc.
Adjusting monitor type and picture source.
Controls for dynamic range and downmix.
Configuration for optional speakers.
General| Number of Discs | 1 |
|---|---|
| Surround Sound | Dolby Digital, DTS |
| Remote Control | Yes |
| Progressive Scan | Yes |
| Playable File Formats | JPEG, MP3 |
| Playable Media Format | CD-R, CD-RW |
| Supported Discs | DVD-Video |
| Video Output | Component, Composite, S-Video |
| Audio Output | Optical |
To Next Page
