What to do if there is no sound from JVC DVD Player?
If you're not getting any sound from your JVC DVD player, first ensure that the speaker cords are properly connected. Also, verify that you've selected the correct source on your device.
How to fix no picture on JVC SP-THU1C DVD Player?
If there is no picture displayed on the TV screen when using your JVC DVD player, check that the SCART cable is connected correctly. Also, ensure that you are using a playable disc or file.
How to turn on JVC SP-THU1C if it doesn't power on?
If your JVC DVD player isn't turning on, make sure the power cord is correctly connected.
Why JVC SP-THU1C DVD Player remote control not working?
If the remote control for your JVC DVD player isn't working, the batteries may be dead. Try replacing them. Also, make sure that direct sunlight isn't shining on the remote sensor.
What to do if JVC SP-THU1C video and audio are distorted?
If the video and audio from your JVC DVD player are distorted, the disc might be scratched or dirty. Try replacing or cleaning the disc. Also, if a VCR is connected between the unit and the TV, connect the JVC DVD player and TV directly.
What to do if JVC SP-THU1C remote control doesn't work as expected?
If your JVC DVD player remote control isn't working as expected, ensure that the remote control mode is set for the desired source by pressing one of the source selecting buttons before operation.
How to adjust picture size on JVC SP-THU1C DVD Player?
If the picture from your JVC DVD player doesn't fit the TV screen, set “MONITOR TYPE” properly.
How to fix sound distortion from optional speakers on JVC SP-THU1C?
If the sound from the optional speakers is distorted on your JVC DVD player, set the speaker position mode to “S. SPK R” when you connect optional speakers.
General| Brand | JVC |
|---|---|
| Model | SP-THU1C |
| Category | DVD Player |
| Language | English |
Covers mains plug, fuse, and wiring.
Lists compatible DVD, CD, VCD, SVCD formats.
Details playable file extensions like MP3, WMA, JPEG, ASF, MPEG, DivX.
Provides details on bit rates, resolutions, and codecs for various file types.
Guides connection of supplied and optional speakers for different layouts.
Instructions for connecting AM loop and FM antennas for optimal reception.
How to connect TV, USB devices, and the power cord.
How to turn the system on and off using the unit or remote.
Steps to play discs or files from USB devices.
How to select and use different surround sound modes.
Details available surround modes like Auto Surround, Dolby, DTS, and DSP.
How to start playback from specific titles, chapters, tracks, or times.
How to search and play files using the file control display.
Explains how to repeat groups, titles, chapters, or entire discs.
How to specify start and end points for repeating a section.
How to adjust monitor type and picture source for optimal display.
How to configure speaker levels, balance, and delay times.
How to store and recall FM/AM stations using presets.
Lists common issues and their solutions.
Provides essential dos and don'ts for safe equipment operation.
To Next Page
