28
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press
until you nd the secondary service you want,
then press /OK to select it.
When the secondary service ends, the unit will automatically switch back to the primary
station.
Presetting Stations
You can store up to 20 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must rst be listening to the station that you would like to save.
2. Press PROG, the display will show “## EMPTY” and the preset number will ash.
3. Press
to select the desired station preset number.
4. Press PROG to conrm. The station will be stored and the display will show “STORE”.
Recalling a Preset Station
1. Once you have saved a station, you can recall a preset station by pressing .
2. Preset number and station name will show on the display to indicate the preset station
you are listening to.
The stored stations will be saved into the memory and power o will not erase it. Storing a new station in
a preset location will erase the previously stored station in that location.
TH-WL701B_703B_IB_140418_Annie.indd 28 18/4/14 7:14 pm
To Next Page
Loading...
Need help?
General
