To Next PageTo Next PageWhy is my JVC TK-C685E remote control not working?
If the JVC Security Camera isn't responding to the remote control, ensure the switches are correctly set and the cables are properly connected. Also, check if the key lock is enabled and disable it.
What to do if JVC Security Camera turns off when rotating?
If your JVC Security Camera loses power when the rotation platform operates, it may be due to the power cable being too long or thin, causing voltage drop. Replace the power cable with a thicker, shorter one to reduce resistance. Also, ensure you have removed the transporting tape.
How to fix JVC Security Camera when no video image appears?
If the JVC Security Camera's video image doesn't appear and the power doesn't turn on, make sure the camera and ceiling mount brackets are securely mounted. Verify that all cables are correctly connected and that you are using a cable of the correct thickness. Remove the lens cap. If the camera has an internal heater, allow it to warm up for about 2 hours.
What does 'AFAN STOP T TB' mean on my JVC TK-C685E?
If 'AFAN STOP T TB' appears on the screen of your JVC Security Camera (TK-C685WPE/TK-C686WPE only), it indicates a malfunction with the built-in cooling fan or heater fan. Record the characters displayed and turn off the power. Consult your local JVC dealer.
How to fix JVC TK-C685E Security Camera when power does not turn on?
If your JVC Security Camera isn't powering on, make sure the cables are correctly connected and the camera and ceiling clamping brackets are securely mounted.
What to do if JVC Security Camera turns off when rotation platform operates?
If your JVC Security Camera turns off when the rotation platform operates, it might be due to the power cable. Replace it with a low-resistance cable (thick and short). Also, ensure you've removed any transporting tape from the unit.
General| Image Sensor Type | CCD |
|---|---|
| Effective Pixels | 752(H) x 582(V) |
| Effective Pixels (H x V) | 752 x 582 |
| Minimum Illumination | 0.05 Lux |
| Minimum Illumination Condition | F1.2 |
| Video Output Impedance | 75 Ohms |
| Power Supply | 24V AC |
| Operating Temperature | -10°C to +50°C |
| Electronic Shutter Speed | 1/50 - 1/100, 000 sec |
| Camera Type | Color |
| Image Sensor | 1/3 inch |
| Video Output | 1.0 Vp-p |
| S/N Ratio | 50dB |
| Horizontal Resolution | 480 TV lines |
| Lens Mount | CS Mount |
| Power Supply Details | AC 24V ± 10% |
| Dimensions | 60 x 58 x 128 mm |
