JVC TM-22EG - CONNECTIONS AND OPERATION; USING WITH JVC VHS RECORDER; USING WITH 8-PIN VTR CONNECTOR

CONNECTIONS
Using in combination with a JVC VHS recorder
The TM-22EG/EK is most convenient when you use it in combination with a portable re-
corder and camera to monitor camerawork when operating outdoors.
To VIDEO To VTR VIDEO input/
OUTPUT VIDEO eable output BNC connector
AUDIO cable
<p
To VTR AUDIO input/ am
To AUDIO output DIN (5-pin) socket
OUTPUT
To
AUDI
To
VTR
AUDIO
input/
OUTPUT
output
DIN
(5-pin)
socket
AUDIO
cable
a
hee VIDEO cable
ail
To VTR VIDEO input/
To
VIDEO
output
BNC
connector
OUTPUT
‘For monitoring, press the INPUT SELECT
“VTR"” switch on the front panel.
Using in combination with a video recorder having an 8-pin VTR connector
Bridged output
To VTR
To VTR {8-pin)
connector connector
(optional)
@ To obtain bridged outputs from a source
applied to the connectors to the right,
shift this switch to OPEN. Leave this
switch at 75 {2 in other cases.
© For monitoring, press the INPUT SE-
LECT “VTR’ switch onthe front panel.
Caution
No video/audio output is available
from the 8-pin VTR connector. Re-
cording directly from this connector
is not possible. ;