JVC UX-A4 - RECORDING; CD edit recording (for CDs with up to 20 tunes)

UX-A4 B/E/G/GI/EN
( RECORDING
® Inrecording, the ALC circuit automatically optimizes the
recording level; adjustment of the recording level is
unnecessary.
© Check that the safety tab on the cassette tape is not
broken off.
Notes:
This unit has recording characteristics suitable for normal
and CrO, tapes. Normal and CrO 2 tapes have different
characteristics from metal tape.
CD edit recording (for CDs with up to 20 tunes)
@
By
checking
the
total
playing
time
of
the
CD,
a
Operate
in
the
order
shown
microcomputer
in
the
unit
automatically
calculates
the
optimum
length
(recording
time)
of
the
tape
to
be
used,
displays
the
required
tape
length,
and
divides
the
tunes
on
the
disc
into
two
groups
to
be
recorded
on
the
two
sides
of
the
tape
so
as
to
minimize
tape
waste.
@ Press to open the CD door. (The power Is switched on.)
Load a disc and press to close the CD door.
© Set to the CD mode.
@ Press the EDIT button while pressing the SHIFT button.
OD
SHIFT EoiT
8
The tune numbers recorded on side A appear.
© Press the SIDE AB button while pressing the SHIFT
button.
Da ©
SHIFT SDE Ale
The tune numbers recorded on side B appear.
(No. 1890) 17