JVC UX-A5 - Cassette Mechanism Component Removal Steps; Head Mount and Pinch Roller Assembly Removal

UX-A5 A/B/E/G/GI/EN
<Cassette Mechanism Section >
Top view
M@ Head Mount Assembly (Fig.5-25, Fig.5-26)
1. Disengage two pawls securing the head wire relay board.
2. Remove two screws retaining the head mount
assembly from the head base.
3. Remove the head gear (1) and the head spring.
H Pinch Roller Assembly (Fig.5-25, Fig.5-27)
1. Release the return spring from the pawl and the return
spring can be removed.
2.
Remove
the
pinch
roller
spring.
Pinch
Roller
(Right)
3. For re-engaging the springs, see the figures of (A) and (B). Head Mount
Head Mount
Head Base
Head Wire
Relay Board
Pinch Roller
(Left)
Pinch Roller Spring
Return
Spring
Pinch
Roller
(Right)
Q
(A)
12 (No. 1857)