JVC UX-A5 - FM Bracket and Capstan Motor Assembly Procedures; FM Bracket;Capstan Motor Assembly Dismounting

UX-A5 A/B/E/G/GI/EN
@ FM Bracket/Capstan Motor Assembly Pawl Soldered
(Fig.5-18, Fig.5-19)
1. Unsolder at the two points connecting the drive motor
and the motor board.
2. Remove two screws @) retaining the FM bracket and
Capstan motor assembly together with.
3. Remove two fixing screws 3) and disengage three
pawls, and the FM bracket and capstan belt can be
removed.
4. Remove two screws (4) retaining the capstan motor to
the FM bracket.
5. For re-engaging the capstan belt, refer to Fig 5-20.
Fig. 5-29
Fig. 5-30
(No. 1857) 13