JVC UX-A5 - Motor Assemblies Dismounting Procedures; Actuator, Flywheel, and Drive Motor Removal Steps

UX-A5 A/B/E/G/GI/EN
| Actuator Motor Assembly (Fig.5-30, Fig.5-31) Actuator Motor Drive Motor Cam Switch Board
=O
Disengage three pawls securing the actuator motor
assembly.
Hi Flywheel Assembly (Fig.5-31, Fig.5-33)
Remove the washer engaged on the capstan shaft and
pull out the flywheel.
M@ Drive Motor (Fig.5-31, Fig.5-34)
1. Pull the gear and the FR arm assembly out of the drive
motor shaft. = Flywheel
2. Remove a screw 5. retaining the drive motor. Contro! Cam
3. Disengage four pawls securing the drive motor.
Flywheel
Fig. 5-31
Actuator Motor
Washer
Drive Motor
Fig. 7-33
FR Arm Ass‘y
eg Gear
Fig. 5-34
14 (No. 1857)