JVC UX-A5 - Cam Switch and Gear Assemblies Dismounting; Cam Switch Board and Actuator Gear Removal

UX-AS5 A/B/E/G/GI/VEN
B Cam Switch Board (Fig.5-31, Fig.5-35)
1. Disengage six pawls retaining the cam switch board.
2. Engagement of the cam switch board with the control
cam is shown in the magnified illustration in the circle.
BH Actuator Gear (big) (Fig. 5-31, Fig.5-36)
Disengage three pawls retaining the actuator gear (big).
B Control Cam (Fig.5-31, Fig.5-36)
1. Disengage two pawls retaining the control cam.
2. Assembled condition of the control cam is illustrated in
the circle.
@ Actuator Gear (small) (Fig. 5-31, 5-36)
Disengage two pawils retaining the actuator gear (small).
Control Cam
an”
J
Control Cam
(Chassis Side)
Actuator Gear
Actuator (Big)
(eral) ©
|
a
(FX Control C
C Ee) ontro! Cam
Ly
sS Pawl (GS)
4 Sai
Iz i LH
Head Base Shaft
CIOS
(OY:
QF
v
4)
Fig. 5-36
(No. 1857) 15