JVC UX-C25DAB User Manual

Connection of USB devices
1. Press the button to select standby mode.
2. Connect the USB device to the USB port on the front side.
Removal of the USB device
1. Press the button to select standby mode.
2.RemovetheUSBdevicefromtheUSBport.
• Always wait until the device has completely read the CD/USB device before continuing.
• If no CD has been laid in the CD compartment, “NO DISC” will be displayed.
•IfthereisnoplayableaudioleintheUSBdevice,“NO SONG” will be displayed.
•Thereadingtimecanexceed10secondswithaudiolesifthereisagreatquantityofmusic
on a CD or USB device.
Playback of CD or audio files (USB, CD)
On the remote control: With the
Source
button, select the source and press the button to
begin playback.
On the main device: Using the
4. 5 mm
27 .0 m m
5. 8 mm
4. 3 mm
button, select the desired source and press the button to
begin playback
InUSBdevicesorCDswhichcontainaudioles(e.g.MP3),thenumberoffolderspresentandthe
leswillbedisplayedasfollows:
Fxx XXX
Here the number behind “F”stands for the number of folders and the second block of numbers for
thetotalnumberofles.
For audio CDs, the information about the number of tracks and total play time will be displayed as
follows:
XX XX:XX
Heretherstblockofnumbersstandsforthenumberoftracksandthesecondforthetotalplaytime
of the CD.
Basic Operating Functions
Stopping Playback: Press the button on the main device or on the remote control to stop
playback.
Interrupting Playback: Press the
button on the main device or on the remote control to inter-
ruptplayback.Thedisplayashesduringthis.Ifyoupressthebuttononemoretimetheplayback
continues.
Searching for a specific passages during playback: Keep the
or button on the main
device or the remote control pressed down for longer than 2 seconds to activate fast rewind or fast
forward. As soon as the desired place is reached, release the relevant button again.
Selecting a specific track: Press the
or button on the main device or on the remote control
in playback, pause or stop mode.
Jump by 10 tracks: Press the
+10
or
-10
button on the remote control in playback, paus or stop
mode.
Selecting a specific folder (only with audio files): Press the
Fold+
or
Fold-
button on the remote
control to select a folder.
10

JVC UX-C25DAB Specifications

General

Quantity	1
Power source	AC
Input voltage	100 - 240 V
Input frequency	50/60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	15 W
Display type	LCD
Equalizer modes	Classic, Flat, Jazz, Pop, Rock
Equalizer bands quantity	5
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
RDS features	PTY
FM band range	87.5 - 108 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	40
Frequency range	30 - 20000 Hz
RMS rated power	14 W
Number of speakers	2
Wi-Fi	-
Bluetooth range	10 m
Bluetooth version	4.2+EDR
Type	Home audio micro system
Cassette deck	No
Product color	Black
Number of optical discs	1 discs
Playback modes	Random, Repeat, Repeat all, Repeat folder
Disc types supported	CD-DA, CD-R, CD-RW
Playback disc formats	CD audio
Audio formats supported	MP3

Weight and Dimensions

Depth	250 mm
Width	180 mm
Height	120 mm
Weight	1600 g