To Next Page

To Previous Page

Programming tracks and files

Usingtheremotecontrol,youcanprogrammetracksfromanaudioCDorlestoplayintheorder

you desire. The following number of spaces in memory is available to you for this:

Audio-CD: 20 memory spaces Files: 99 memory spaces

Procedure with audio CD

1.The“CD”sourcemustbeinStopmode,otherwise“STOP FIRST” will show in the display.

2. Press the

PRG

button to start the programming mode.

3. The display will now show “01 PR01” where “01”willbeashing.Therstblockofnumbers

shows the current track, the second block of numbers shows the current storage space.

4. Using only the or button, select the track which you want to drop into the current storage

space.

5. Press the

PRG

buttontoconrmtheoperation.

6.Afterwardsthenextstoragespacewillbedisplayed.Repeatsteps4and5untilyourselectioniscom-

pleted or the complete number of memory spaces in occupied. In this case, “Full” will be displayed.

7. With the button, you can start playback of the programmed tracks. During playback

the number of the track and that of the programme space will be alternately displayed.

8. Pressing the

button twice deletes the programming.

Procedure with audio files

1.The“USB”sourcemustbeinStopmode,otherwise“STOP FIRST” will show in the display.

2. Press the

PRG

button to start the programming mode.

3. The display will now show “01 PR01“ where “01“willbeashing.Therstblockofnumbers

shows the current track, the second block of numbers shows the current storage space.

4. Using the

Fold+

Fold-

button, select a folder or retain the current folder. When a folder has

been selected, the display changes to “Fxx XXX“. Here, “Fxx“ stands for the current folder and “XXX“

for the current track.

5. Using only the or button, select the track which you want to drop into the current storage space.

6. Press the

PRG

buttontoconrmtheoperation.

7.Afterwardsthenextstoragespacewillbedisplayed.Repeatsteps4and6untilyourselectioniscom-

pleted or the complete number of memory spaces in occupied. In this case, “Full” will be displayed.

8. With the button, you can start playback of the programmed tracks.

9. Pressing the

button twice deletes the programming.

• If the button is pressed during playback the process is interrupted. Turning off

the device deletes any programme which is present.

Questions and Answers:

Need help?

Do you have a question about the JVC UX-C25DAB and is the answer not in the manual?

JVC UX-C25DAB Specifications

General

Quantity	1
Power source	AC
Input voltage	100 - 240 V
Input frequency	50/60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	15 W
Display type	LCD
Equalizer modes	Classic, Flat, Jazz, Pop, Rock
Equalizer bands quantity	5
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
RDS features	PTY
FM band range	87.5 - 108 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	40
Frequency range	30 - 20000 Hz
RMS rated power	14 W
Number of speakers	2
Wi-Fi	-
Bluetooth range	10 m
Bluetooth version	4.2+EDR
Type	Home audio micro system
Cassette deck	No
Product color	Black
Number of optical discs	1 discs
Playback modes	Random, Repeat, Repeat all, Repeat folder
Disc types supported	CD-DA, CD-R, CD-RW
Playback disc formats	CD audio
Audio formats supported	MP3