25
AUX / AUDIO IN Operation
1. While in ON mode, turn SOURCE dial on the unit or repeatedly press AUX or AUDIO
IN on the remote control to select the AUX or AUDIO IN source. The words “AUX” or
“AUDIO IN” will be shown on the display.
2. Operate your audio device directly for playback features.
3. Press VOL + / – to adjust the volume to your desired level.
Bluetooth® Operation
Pairing the unit with a Bluetooth® device to listen to music:
1. Turn the SOURCE dial on the unit or directly press the button on the remote control
to select the Bluetooth® mode. The word “BT” will be showed on the display and the
Bluetooth® indicator will blink.
2. Activate your Bluetooth® device and select the search mode. “UX-D150” will appear on
your Bluetooth® device list.
3. Select “UX-D150” and enter “0000” for the password if necessary. If connect successful,
the Bluetooth® indicator will light up blue and the unit will make a beep sound.
4. To disconnect the Bluetooth® function, switch to another function on the unit or disable
the function from your Bluetooth® device. The unit will make a beep sound.
If your Bluetooth® device supports A2DP, play music via your device.
If your Bluetooth® device supports AVRCP, use supplied remote control to control play.
• To pause / resume playback, press .
• To skip to a track, press / .
• To increase or decrease the volume, press VOL + / – .
• The operational range between the unit and the device is approximately 10 metres.
• Before connecting a Bluetooth® device to the unit, ensure you know the device’s capabilities.
• Compatibility with all Bluetooth® devices is not guaranteed.
• Any obstacle between the device and the unit can reduce operational range.
• Keep this player away from other electronic devices that may cause interference.
• If no other Bluetooth® devices pairs with this unit within 2 minutes, the unit will recover to its previous
connection.
• The player will also be disconnected when your device is moved beyond the operational range.
To Next Page
Loading...
Need help?
General
