JVC UX-G28 User Manual

15
Then select a track.
Next program step will be indicated when you program
tracks.
For CD
For MP3/WMA
3 Repeat step 2 to program the other tracks.
4 Start playback.
The tracks you have selected are played back in the order
you have programmed.
• Tracks cannot be selected with the Numeric buttons during
Program Play.
To check the programmed contents
While the PROG. indicator is shown on the display and
before playback...
To modify the program
While the PROG. indicator is shown on the display and
before playback...
To skip a track: To pause: To stop:
To release, press
again.
MP3 CD
PROG.
Track number
DISPLAY/
PROGRAM
CD
PROG.
MP3 CD
PROG.
CD
USB
MEMORY
or
CD
USB
MEMORY
or
STOP
Edit:
1 Press DISPLAY/PROGRAM repeatedly until
displaying the programmed number you want to edit.
2 Repeat the step 2 on page 14.
To add step in the program:
1 Press DISPLAY/PROGRAM repeatedly until
displaying "00" on the display.
2 Repeat the procedure 2 on page 14.
To erase entire program:
Exit from Program mode at the same time.
All the programs are also erased under the following action:
open CD door, change other sources, turn off the unit.
DISPLAY/
PROGRAM
STOP
UX-G28[J].BOOK Page 15 Monday, November 12, 2007 10:49 AM

JVC UX-G28 Specifications

General

Impedance	4 Ω
RMS rated power	16 W
Number of speakers	2
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	10 %
Supported radio bands	AM, FM
Type	Home audio micro system
Product color	Black
Optical disc player	Yes
Number of optical discs	1 discs
Speaker depth	178 mm
Speaker width	136 mm
Speaker height	212 mm
DVD Audio playback	No
Display type	LCD
USB 2.0 ports quantity	1

Weight and Dimensions

Weight	2500 g