4
Getting Started
Step 1: Unpack
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
•Batteries (2)
If any item is missing, consult your dealer immediately.
Step 2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
• If the range or effectiveness of the remote control
decreases, replace both batteries.
9
Step 1:Unpack the package and
check the accessories.
Step 2: Prepare the remote control.
Step 3: Hook up the components such
as AM/FM antennas, speakers,
etc. (see pages 5 to 6).
Finally plug the AC power cord.
Now you can operate the System.
Caution
Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
3
2
1
R03(UM-4)/AAA(24F)
UX-G28[J].BOOK Page 4 Monday, November 12, 2007 10:49 AM
To Next Page
Loading...
