EasyManua.ls Logo

JVC UX-G49 - Picture and Scanning Adjustments; Scanning Mode Selection; Picture Tone Customization

JVC UX-G49
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Changing the Scanning Mode
This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the
COMPONENT VIDEO OUT jacks, you can enjoy a high
quality picture playback by selecting “PROGRESS.”
Before playback...
Changing the Picture Tone
While showing a playback picture on the TV, you can select
a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
While playing, display VFP setting screen.
2 Select a preset picture tone.
To clear the screen,
press VFP again while holding SHIFT.
To adjust the picture tone
1
Select “USER1” or “USER2.”
Follow steps 1 and 2 explained in “To select a preset
picture tone.”
2 Select a parameter you want to adjust.
3 Adjust the parameter.
4 Repeat steps 2 and 3 to adjust other parameters.
To clear the screen,
press VFP again while holding SHIFT.
RGB For a conventional TV.
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
Y/C For a conventional TV.
Select to send S-Video signals through the
AV (SCART) terminal.
PROGRESS For a progressive TV.
Select to enjoy a progressive scanned
picture through the COMPONENT
VIDEO OUT jacks.
•The (Progressive) indicator lights on
the display.
Remote
ONLY
INFO
PROGRESS
SCAN MODE
9
Y/CRGB
ENTER/SET
(while holding...)
Remote
ONLY
VFP
10
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
(while holding...)
On the TV
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings.
GAMMA Adjust if the neutral color is bright
or dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright
or dark (–8 to +8).
CONTRAST Adjust if the brightness ratio is
unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
PTY PTY
NORMAL CINEMA
USER2
USER1
ENTER/SET
TV CH
TV CH
ENTER/SET
TV CH
TV CH
UX-G48[B].book Page 14 Friday, June 22, 2007 11:28 AM

Table of Contents

Related product manuals