16
Advanced Radio Operations
Receiving FM Stations with Radio Data
System
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
To show the Radio Data System information
While listening to an FM station...
Searching for a Program by
PTY Codes
You can locate a particular kind of program from the preset
channels (see page 8) by specifying the PTY codes.
To search for a program using the PTY codes
1 While listening to an FM station...
2 Select a PTY code (see page 17).
3 Start searching.
The System searches for 30 preset FM stations, stops
when it finds the one you have selected, and tunes in to
that station.
• If no program is found, “NOTFOUND” appears on the
display.
• To stop searching any time during search, press PTY
SEARCH (while holding SHIFT).
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing, press PTY
SEARCH again (while holding SHIFT).
PS (Program
Service)
Shows commonly known
station names.
PTY (Program
Type)
Shows types of broadcast
programs.
RT (Radio Text)
Shows text messages the station
sends.
Enhanced Other
Networks
Provides information about the
types of the programs broadcast
by the Radio Data System
stations of the different
networks.
PS Station names are displayed. “NO PS” will
appear if no signal is sent.
PTY The broadcast program type is displayed. “NO
PTY” will appear if no signal is sent.
RT Text messages the station sends are displayed.
“NO RT” will appear if no signal is sent.
PTY ,
PTY
SEARCH
TA/News/Info
DISPLAY
SHIFT
Remote control
Remote
ONLY
DISPLAY
PS PTY RT
Frequency
(Non-Radio Data
System signal)
Clock
Remote
ONLY
MENU/PL
PTY
SEARCH
(while holding...)
PTY PTY
(while holding...)
MENU/PL
PTY
SEARCH
Ex. When “NEWS” is selected
(while holding...)
UX-G48[B].book Page 16 Friday, June 22, 2007 11:28 AM
To Next Page
Loading...
