JVC UX-G5 Service Manual

(No.MB431)1-9
3.1.10 Removing the Power board
(See Fig.14 to 16)
(1) Remove the two screws K1 from CD MECH cover and
power board. (See Fig.14)
(2) Remove the two screws K1 from rear plate and power
board. (See Fig.14-1)
(3) Disconnect the wire K2 from the connector CN102
on the
AMP board. (See Fig.15)
(4) Disconnect the two wire K3 from the connector CN901
and
CN902
. (See Fig.16)
Fig.14
Fig.14-1
Fig.15
Fig.16
Power board
K1
k1
K2
K3

JVC UX-G5 Specifications

General

Brand	JVC
Model	UX-G5
Category	Stereo System
Language	English