6
To
Press
Indication/Result
System Remote
Turn on or off (standby)
the power
The STANDBY lamp on the System turns off/on.
Select a source
See “Playing Back a Disc/USB Mass Storage Class Device” on
page 7.
See “Listening to the Radio” on page 9.
See “Listening to Digital Audio Player” on page 12.
Adjust the volume
Adjustable range: Level 0 (“VOL MIN”) to level 40 (“VOL MAX”).
Drop the volume in a
moment
—
To restore the volume, press again, or adjust the volume level.
Activate the EALA
surround mode —
The indicator lights up.
To cancel this function, press repeatedly until indicator
lights off.
Emphasize the sound
(Sound Turbo function)
The S.TURBO indicator lights up.
To cancel this function, press again.
Reinforce the bass
sound (Active Hyper
Bass Pro function) —
Press and hold until the AHB indicator lights up.
• When Sound Turbo function is activated (see above), this
function cannot be activated.
To cancel this function, press and hold again when Sound
Turbo function is deactivated.
Adjust the tone (Bass/
Treble)
—
Press once for adjusting the bass level; twice for treble level,
then, press VOLUME +/–.
Adjustable range: –3 to +3.
Change the display
brightness
—
Press when the System is turned on.
To cancel this function, press again.
Change the display
information (Clock and
Source)
—
For setting the clock, see “Setting the Clock and Using Timers”
on page 13.
• Not applicable for FM.
Set the ECO (ecology)
Mode
—
Press when the System is on standby.
Setting the ECO mode allows you to reduce power consumption
by turning the display off while on standby.
To cancel this function, press again when the System is on
standby.
EN01-12_UX-G800D[B]f.indd 6EN01-12_UX-G800D[B]f.indd 6 3/18/08 3:24:04 PM3/18/08 3:24:04 PM
To Next Page
Loading...
Need help?
General
