EasyManuals Logo

JVC UX-G800D User Manual

JVC UX-G800D
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
7
Playing Back a Disc/USB Mass Storage Class Device
This System can play back...
– CD.
– CD-R/CD-RW recorded in audio CD format (CD-DA) or
recorded MP3/WMA files in ISO 9660 format.
– USB mass storage class device containing MP3/WMA
files.
When playing back an MP3 or WMA track, MP3 or
WMA indicator lights up.
Loading a Disc (on the System only)
1
Press to open the disc
tray.
2
When using an 8 cm
disc, place it on the
inner circle of the disc
tray.
3
Press to close the disc
tray.
Connecting a USB Mass Storage Class
Device
You can connect a USB mass storage class device such
as a USB flash memory device, MP3 player, multimedia
card reader, etc. to the System.
NOTES:
When connecting with a USB cable, use the USB 2.0 cable
whose length is less than 1 m.
USB mass storage class device is charged through the
USB MEMORY terminal when the System is turned on and
the source is “USB.”
You cannot connect a computer to the USB MEMORY
terminal of the System.
The following operations are explained using
the remote control, unless mentioned otherwise.
However, if the System has the same or similar button
names, they can also be used for the operations.
Do not disconnect the USB mass storage class device
when the System is turned on. It may cause malfunction
of both this System and the device.
Noise and static electricity may stop the USB mass
storage class device sound. In this case, disconnect and
connect the USB mass storage class device again after
turning off the System.
Basic Disc/USB Mass Storage Class
Device Operations
To play back the disc/USB mass storage class
device
Current track number and elapsed
playing time appear.
For MP3/WMA files: Before current
track number and elapsed playing time
appear, the tag information appears if it
is recorded.
During playback, press again to pause.
To stop playback
While playback is stopped, total track
number and total playing time (for
MP3/WMA files, group number and track
number) appear.
To select a track
Select the next tracks.
To go back to the beginning of the
current or previous tracks.
To select a group (MP3/WMA only)
Select the next groups.
Select the previous groups.
To forward search/reverse search
Press and hold to fast-forward the track
during playback.
To stop searching, release the button.
Press and hold to fast-reverse the track
during playback.
To stop searching, release the button.
USB cable (not supplied)
EN01-12_UX-G800D[B]3.indd 7EN01-12_UX-G800D[B]3.indd 7 2/21/08 6:34:48 PM2/21/08 6:34:48 PM

Other manuals for JVC UX-G800D

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC UX-G800D and is the answer not in the manual?

JVC UX-G800D Specifications

General IconGeneral
BrandJVC
ModelUX-G800D
CategoryStereo System
LanguageEnglish

Related product manuals