1-10 (No.MB408)
3.1.4 Removing the cassette chassis assembly
(See Figs.8 to 10)
• Remove the metal cover and rear cover.
(1) Remove the two screws E attaching the cassette chassis
assembly. (See Fig.8.)
(2) From the both sides of the main body, release the joints d
and lift the cassette chassis assembly in the direction of the
arrow. (See Figs.9 and 10.)
(3) From the right side of the main body, disconnect the card
wires from the connectors (CN701
, CN702, CN720) on the
foraward side of the micom board. (See Fig.10.)
Fig.8
Fig.9
Fig.10
E
d
Cassette chassis assembly
Cassette chassis assembly
d
CN702
CN701
Micom board
CN720
To Next Page
Loading...
