JVC UX-P30 Series Service Manual

(No.MB049)1-13
3.1.7 Removing the power transformer assembly
(See Fig.14 and 15)
• Prior to performing the following procedure, remove the metal
cover, the rear cover, the CD mechanism assembly and the
rear panel.
(1) Remove the cord stopper upwards on the back of the body.
(2) Disconnect the power cord from connector J1000
on the
board of the power transformer assembly.
(3) Disconnect the wire from connector FW903
on the main
board.
(4) Remove the four screws K attaching the power transformer
assembly.
Fig.14
Fig.15
J1000
Power cord
Cord stopper
Power transformer
assembly
K
J1000
Power transforme
r
assembly
Main board
CN907
K

JVC UX-P30 Series Specifications

General

Brand	JVC
Model	UX-P30 Series
Category	Stereo System
Language	English