JVC UX-P400 Service Manual

(No.MB262)1-19
3.1.16 Removing the headphone jack board
(See Fig.27)
• Prior to performing the following procedure, remove the side
panels L/R and front panel assembly.
(1) From the inside of the front panel assembly, remove the
screw U attaching the headphone jack board.
Reference:
After attaching the headphone jack board, fix the wire with the
spacer.
Fig.27
Spacer
Headphone jack board
U
Front panel assembly
Wire

JVC UX-P400 Specifications

General

Brand	JVC
Model	UX-P400
Category	Stereo System
Language	English