To Next PageTo Next PageWhat to do if the JVC UX-T550 remote control is not working?
First, check if the batteries in the remote control are exhausted and replace them if needed. Also, make sure that the remote sensor section on the stereo system is not exposed to bright light, such as direct sunlight, as this can interfere with the remote's operation.
How to fix a JVC UX-T550 Stereo System CD player that won't play?
Ensure that the CD is not upside down in the player. Also, check the CD for dirt or smudges that might prevent it from playing correctly; clean the disc if necessary.
Why is the timer not working on my JVC UX-T550 Stereo System?
Verify that the current time is set correctly on the system. Also, confirm that the timer mode is activated and displayed on the unit.
General| CD Player | Yes |
|---|---|
| Tuner | FM/AM |
| Bluetooth | No |
| Speakers | 2-way speakers |
| Remote Control | Yes |
| Inputs | AUX input |
| Outputs | Headphone |
| Functions | CD Playback, FM/AM Radio, AUX Input |
Describes laser safety warnings and interlocks for user protection.
General guidelines to prevent hazards like electric shock and fire.
Comprehensive safety advice and warnings for operating the equipment.
Steps for connecting the main AC power adapter to the unit.
Identification of CD player components, buttons, and displays.
Identification of tuner and cassette deck components, buttons, and displays.
Instructions for playing an entire CD, stopping, and temporary pausing.
Setting up a custom sequence of tracks to play in order.
Using Auto/Mono, Seek, and Manual tuning for radio stations.
Methods for auto-preset tuning and manually storing radio stations.
Automatically recording tracks from a CD onto a cassette tape.
Initial setup for accurate time display and timer functions.
Configuring the unit for timed recording or playback operations.
Scheduling future broadcast recording sessions.
Scheduling playback of CDs, tapes, or broadcasts.
