To Next PageTo Next PageWhy is my JVC CD Player remote not working?
If your JVC CD Player's remote control isn't working, first, replace both batteries. If that doesn't solve it, check for any obstructions between the remote and the CD player. Finally, make sure direct sunlight isn't hitting the CD player's remote sensor; if it is, shade the unit from the sun.
What to do if my JVC XL-FZ258BK - CD Changer CD Player is not playing?
If your JVC CD Player isn't playing CDs, make sure the disc is loaded with the label-side up in the disc tray and positioned correctly according to the disc tray's groove. If moisture has condensed inside the unit, leave it turned on until the moisture evaporates.
Why does my JVC CD Player sound have noise?
If the sound from your JVC CD Player includes noise, try wiping the disc surface with a soft cloth to remove any dirt. If the disc is warped, replace it with a new one.
What to do if JVC XL-FZ258BK - CD Changer CD Player sound is intermittent?
If the sound from your JVC CD Player is intermittent, the disc might be scratched. Replace the disc with a new one.
How to troubleshoot a JVC CD Player that is not operative?
If your JVC CD Player is not operative, ensure the power plug is properly connected to the AC outlet. Also, make sure discs are loaded correctly in the disc tray.
How to fix no sound from headphones on JVC XL-FZ258BK - CD Changer?
If you're not getting any sound from your headphones when using your JVC CD Player, the headphone volume might be set too low. Adjust the volume using the PHONES LEVEL control.
General| Type | CD Changer |
|---|---|
| Number of Discs | 5 |
| Playback Formats | CD, CD-R, CD-RW |
| Frequency Response | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 100 dB |
| Dynamic Range | 96 dB |
| Output Voltage | 2.0 V |
| Digital Output | Optical |
| Remote Control | Yes |
| Channels | 2 (Stereo) |
| Power Requirements | AC 120V, 60Hz |
| DAC | 1-bit |
Essential safety instructions to prevent electrical shock, fire hazards, and appliance damage.
Electrical plug and digital apparatus noise emission compliance for Canada.
Precautions for Class 1 laser products; avoid direct exposure to the laser beam.
Guidelines on proper disc loading, handling potential problems, power cord safety, and condensation.
Instructions for connecting analog and digital audio outputs to amplifiers or other components.
Steps to properly connect the main unit's AC power cord to the wall outlet.
How to use the COMPU LINK cord for synchronized operations between JVC components.
Covers unit power, remote control, playing, stopping, and adjusting headphone volume.
Detailed explanation of JVC's COMPU LINK system for integrated component control.
Common operational issues, their causes, and suggested remedies for quick resolution.
