JVC XV-N670B - User Manual

28 pages

To Next Page

To Next Page

Loading...

XV-N670B

XV-N672S

DVD PLAYER

INSTRUCTIONS

LVT1873-001A

[J]

For Customer Use :

Enter below the Model No. and

Serial No. which are located on

the rear of cabinet. Retain this

information for future reference.

Model No.

Serial No.

DV300H-JN.BUSAJJK/S_MFL47214202_ENG

Table of Contents

Questions and Answers:

W
Wesley RobinsonSep 2, 2025
Why is my JVC XV-N670B DVD Player remote control not working?
- J
  jelliottSep 2, 2025
  If the remote control isn't working properly with your JVC DVD Player, try these solutions: First, ensure that you are pointing the remote control directly at the remote sensor on the DVD player. Next, make sure you are operating the remote control close enough to the DVD player. Finally, the remote control code might not match the unit. Identify the correct remote control code for your unit (see page 23).
M
Mikayla WalterAug 31, 2025
What to do if my JVC XV-N670B DVD Player has no power?
- J
  Joseph GreenAug 31, 2025
  If your JVC DVD Player has no power, the power cord may be disconnected. Make sure to securely plug the power cord into the wall outlet.
D
Donna RodriguezAug 29, 2025
Why is there no picture on my JVC XV-N670B DVD Player?
- S
  Steven MoranAug 30, 2025
  If you are getting no picture on your JVC DVD Player, there are a few potential causes. First, your TV might not support the resolution set on the DVD player. Consult your TV's manual and use the RESOLUTION button on the DVD player to select a compatible resolution. Second, ensure that your TV is set to receive the DVD signal output. Finally, check that the video cable is securely connected.
W
Whitney ObrienAug 28, 2025
Why won't my JVC XV-N670B start playback?
- S
  Samantha BakerAug 28, 2025
  If your JVC DVD Player isn't starting playback, it could be due to an incompatible disc. Ensure you're using a playable disc, and check the disc type and regional code for compatibility.
B
Brenda RomeroAug 27, 2025
How to troubleshoot a JVC DVD Player that has no power?
- P
  Patricia BlanchardAug 27, 2025
  If your JVC DVD Player isn't turning on, the most likely cause is that the power cord is not properly connected. Ensure the power cord is securely plugged into the wall outlet.
N
Nicole DrakeAug 25, 2025
Why my JVC DVD Player has no sound?
- J
  James HarrisonAug 25, 2025
  If there's no sound coming from your JVC DVD Player, check these things: First, make sure the equipment connected to the audio cable is set to receive DVD sound output by selecting the correct input mode on the audio receiver. Check that the connected equipment is powered on. Finally, ensure that the AUDIO options are correctly configured and then turn on the DVD player again.
T
Thomas OlsonAug 22, 2025
What to do if my JVC XV-N670B does not start playback?
- M
  Michael HarringtonAug 23, 2025
  If your JVC DVD Player does not start playback, the disc inserted may not be playable. Ensure you insert a playable disc, checking both the disc type and the regional code for compatibility.

JVC XV-N670B Specifications

General

Brand	JVC
Model	XV-N670B
Category	DVD Player
Language	English

Related product manuals

Preview: JVC XV-N672S

Preview: JVC XV-N5SL

Preview: JVC XV-N322S