Basic Playback
D1
1 [POWER]
Press this key to turn the JD-VD502's power on and off.
2 [OPEN/CLOSE]
Press OPEN/CLOSE to open the tray, and then place the disc on it. Press this button again to close
the tray. When the disc has loaded, the TV screen will display the disc type, and its content will be
automatically played or displayed. Note that discs containing MP3 and JPEG files cannot be played
automatically.
3 [PLAY/ENTER]
Press to play or confirm your selections.
4 [PAUSE/STEP]
In play mode, press this key to pause; each subsequent press will move the picture one frame at a time.
Press "PLAY" again to resume normal playback.
5 [MENU]
In the DVD play mode, press MENU key once to return to the most recent submenu. Press it again to
return to the main menu. For VCD and SVCD playback, refer to the details on page C1.
Once done, press the number key selecting your desired song. If you want to cancel disc playback,
press the MENU key. The TV screen will show "PBC off". Then, press number keys to select desired song.
6 [STOP]
Press STOP one time, and the unit will memorize the stopped position. When the unit continues playing,
it will play from the previously stopped position. Pressing STOP the second time causes the unit to stop
playing and cancels the memorized position.
To Next Page
Loading...
Need help?
General
