EasyManua.ls Logo

JXCT 485 - Chapter 5 Appendix

JXCT 485
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
一站式物联网供应平
set
10
Explanation of total solar radiation calculation:
0047H(Hexadecimal)=71=>Total solar radiation=71 W/m2
Chapter 5 Appendix
5.1 Product additional instructions
"485 Device Field Wiring Manual": Describes the
wiring guidelines for 485 products. Please check and
follow the guidelines, otherwise it may cause
unstable communication.
"Revision of temperature and humidity deviation
of 485 sensor": Describes how to confirm and adjust
temperature and humidity deviation when you feel
that there is a deviation in temperature and
humidity.
"Using modbus to modify device baud rate and
address": describes if you do not use software, use
modbus commands to modify the baud rate and slave
station number.
"How to Use Single Chip Computer for 485
Communication": describes how to use 51
The one-chip computer reads the sensor
information, and carries on the science
popularization to some basic knowledge.
"How to calculate CRC16": Describes the modbus
RTU protocol

Related product manuals