JXCT 485 - Chapter 2 Hardware Connection

5
Chapter 2 Hardware Connection
2.1 Inspection before equipment installation
Please check the equipment list before installing the equipment:
name
Quantity
Total solar
radiation
sensor
1 set
12V waterproof
power supply
1 set
（Optional）
USB to 485 device
1
set
（Optional）
Warranty
card/certificate
1 serving
Wide voltage power input is 12-24V. Note when wiring the 485
signal line
The two wires A/B cannot be reversed, and the addresses of
multiple set devices on the bus cannot be conflicted