This product can also be used by combining multiple sensors on a 485
bus,
Please observe "485 Bus Field Wiring Rules" when performing 485 bus
combination
(See Appendix). In theory, one bus can connect more than 16 485
sensors
If you need to connect more 485 sensors, you can use a 485 repeater
to expand
Charge more 485 devices, connect the other end to the PLC with 485
interface, connect the MCU through the 485 interface chip, or use
USB to 485 to connect to the computer, and use the sensor
configuration tool provided by our company to configure and test.
To Next Page
Loading...
