The processing input channels CH1 and CH2 can be independently equalized via the K-framework software,
then they can be routed to any output channel (A1, A2, B1, B2) thanks to the
Output Matrix
. The user
can adjust the level of the four output channels independently. If necessary, the phase can be inverted
on each output channel.
It is also possible to add e delay (up to 6ms) on the output channels B1 and B2.
A1 A2 B1 B2
CH1
X X
CH2
X X
Output Matrix - Default settings
To Next Page
Loading...
