1. INTRoDUCTIoN
The KA14 is a versatile amplifier, easily adaptable for small applications that do not require a lot of
power. Responding to the needs for a simple solution for those who do not have a lot of additional
resources, the KA14 is a complete system with a mixer, processor and amplifier.
The KA14 features four fully independent and configurable output channels (4 x 300 W @ 4 Ω). The
integrated DSP offers EQ, Matrix, Levels, Delays and a Limiter to avoid the need for external additional
processors. The front panel has an easy-to-use touchscreen that gives access to all the basic functions
for quick setup and corrections. The KA14 can be used as a mixer for fixed installations thanks to the
XLR and RCA analog inputs.
An onboard library preset with K-array speaker provides configuration for endless combinations of
the Lyzard, Vyper, Tornado and Rumble loudspeakers. All DSP functions are remote controlled via the
K-framework software.
The amplifier is built into a 2U lightweight, aluminum chassis and comes with a kit of removable rack
adapters and four rubber pads for flat surfaces. KA amplifiers feature optical limiters and protection
against overheating, overcurrent and short circuits.
2. KEY fEATURES
• 1000 W in just 2 rack units
• XLR and RCA Inputs
• 4 independent fully configurable outputs
• Integrated DSP with processing, matrix and
delays
• Onboard touch screen for easy access functions
• K-array loudspeakers presets already on board
• USB connectivity for remote control
• Optimized for Lyzard, Vyper, Tornado and
Rumble speakers
• Restaurants, Lounges, Shops
• Exhibit audio for museum displays
• Portable and Installed AV systems
3. APPLICATIoNS
To Next Page
Loading...
