K-array Kommander-KA Series - Audio Configuration; Output Configuration

Kommander-KA
User Guide
16
Audio Conguration
       

Output Conguration
       
factory presets can be loaded on the output channels.

output connections muted: in order to activate the output

Care must be taken matching the loudspeaker presents with

1. 
2. 
3. 
4. 
loudspeaker model and version actually connected to the

5. If needed, set the number of loudspeakers that are

6. 







MANUAL
Vyper
MADE IN ITALY
Tuscany - Florence
www.k-array.com
Passing Through
Fixing Points
Passing Through
Fixing Points
IMPEDENCE SWITCH
8Ω 32Ω
INPUT
PARALLEL OUT


loudspeaker model and version connected to this output channel


connected in parallel to this output channel



frequency crossover point.