CD1000 Pin Welder Instruction Manual
K.C.D. Studwelding, Cheltenham, Victoria. Tel: 03 9584 1588, Fax: 03 9584 1688
APPENDIX 1:
TROUBLE SHOOTING GUIDE
THE FOLLOWING PAGES CONTAIN A QUICK REFERENCE GUIDE TO
COMPONENT IDENTIFICATION AND LOCATING SIMPLE PROBLEMS
THAN CAN EASILY BE FIXED BY A QUALIFIED TECHNICIAN.
IT IS HIGHLY RECOMENDED THAT ONLY
QUALIFIED TECHNICIANS REMOVE THE
COVER OF YOUR CD1000 WELDING UNIT AS
CAPACITORS IN THE MACHINE HAVE THE
POTIENTIAL TO STORE EXTREMELY
DANGEROUS HIGH VOLTAGES WITH OR
WITHOUT THE POWER SUPPLY CONNECTED.
THEREFORE IT IS IMPORTANT THAT THE
MACHINE AND THE 240V OUTLET ARE BOTH
TURNED OFF.
If you are not able to have a qualified technician look at the unit
should a fault occur, contact K.C.D. Studwelding for further advice.
To Next Page
Loading...