EasyManua.ls Logo

K-FEE ESPRESTO SQUARE ID2 - Water Filter Installation

K-FEE ESPRESTO SQUARE ID2
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18 19
4
Remove the drip tray, the used capsu-
le container and the water tank. Please
empty all containers.
Caution: The used capsule container is en-
closed on the underside and can contain
residual liquid. Please pour any residual
liquid into the washbasin first before dis-
posing of the capsules in the waste bin.
5
Rotate the spout and remove it. Please
now rinse this out with hot water and screw
it on again.
6
Clean all the containers you have remo-
ved thoroughly.
7
Take the mains plug out of the mains
socket. Open the lever and clean the appli-
ance from outside. After this, refit all the
containers into the appliance. You should
only reconnect the appliance to the power
supply after this.
1
Place a collecting container under the
spout. Open the lever and close it again to
activate capsule ejection.
2
Rinse the appliance by pressing the
milk button, and empty the collecting
container afterwards.
3
Please wait 5 minutes until the appli-
ance switches o automatically.
NOTE
We recommend that you carry
out a rinse process before and
after each time you prepare a drink to
ensure optimum drink quality and for
hygienic reasons.
Please remember: if you do not place a
collecting container under the coee
spout during each rinse process, the
drip tray will fill up very quickly and
may overflow.
WARNING Very hot water –
scalding hazard.
PROHIBITED Do not reach
inside – injury hazard.
SAFETY INFORMATION
Risk of damage. Only use a moist cloth and, if required, a mild cleansing
agent. Never use scouring agents or aggressive cleansing agents. Never
wash appliance components in the dishwasher.
4
2
6
7
5
English
Daily maintenance

Related product manuals