Instruction Manual
Section Six
Workhead with No. 11 B&S Spindle Taper, B2043M5 Variable Speed Motor
(DC.) Driven Workhead with No. 5 Morse Spindle Taper, B2043B12 Variable
Speed Motor (D.C.) Driven Workhead with No. 12 B&S Spindle Taper.
B. WORKHEADS FOR MODEL SERIES B6060 AND B6C62:
B7042 Sensitive Workhead with No. 11 B&S Spindle Taper, B7042XM Sensi-
tive Workhead with No. 5 Morse Spindle Taper, B7042XB Sensitive Workhead
with No. 12 B&S Spindle Taper, B7042XB11 Sensitive Workhead with No.
11 B&S Spindle Taper (Index Discs mount at rear; BS41 Collet Fixture for
5C Collets), B9092M Sensitive Workhead with 50MM and No, 5 Morse Spindle
Tapers (B792F 50MM to 40MM Adapter Sleeve, B792C 50MM to 11 B&S
Adapter Sleeve), B9092B&S Sensitive Workhead with No. 50MM and No. 12
B&S Spindle Tapers, B6043 Motor (AC.) Driven Workhead with No. 11
B&S Spindle Taper, B6043M5 Motor (AC.) Driven Workhead with No. 5
Morse Spindle Taper, B6043B12 Motor (A.C.) Driven Workhead with No, 12
B&S Spindle Taper, B7043 Variable Speed (@ 50-450 RPM) Motor (D.C.)
Driven Workhead with No. 11 B&S Spindle Taper, B7043M Variable Speed
50-450 RPM) Motor (D.C) Driven Workhead with No. 5 Morse Spindle
Taper, B7043B12 Variable Speed (@ 50-450 RPM) Motor (D.C.) Driven Work-
head with No. 12 B&S Spindle Taper, B9043M Motor (A.C. ) Driven Workhead
with No. 50MM and No. 5 Morse Spindle Taper, B9Q43B&S Motor (A.C.)
Driven Workhead with No. 50MM and No. 12 B&S Spindle Taper (B9043M
and B9043B&S have standard speed of 250 RPM. Other speeds available on
request.) B10043M Variable Speed (@ 10-370 RPM) Motor (D.C.) Driven
Workhead with No. 50MM and No. 5 Morse Spindle Tapers, B10043B&S
Variable Speed (@ 10-370 RPM) Motor (D.C.) Driven Workhead with No
50MM and No. 12 B&S Spindle Tapers.
C. Coolant Systems (may be retro-fitted by customer; state model, serial num-
ber, and voltage):
B935 Coolant Attachment (wheels up to 7" x ½" ), fits all BA900, BA960, and
BA962 series. B2035 Coolant Attachment (wheels from 5" to 7" x ½"), fits
all B2000, B2060, and B2062 series. B6035 Coolant Attachment (wheels from
5" to 7" x ½"), fits all B6060 and B6062 series B6035HD Heavy Duty Coolant
Attachment (wheels up to 8" x ¾"), fits all B6062 series.
D. B876 3" Column Extension for machines with 4" column.
E. Special Toothrest Slide Blade and Arm for use with formed cutters with low
helix— up to @ 20°; B670RB Blade; B670T Arm. See Photo 38, page 51,
for use with BA940 or B6040 toothrests.
F. Special wheel guards available on request.
-100-
To Next Page
Loading...