K. O. LEE B6062 - Page 43

Instruction Manual
Section Five
TOOTH
ANGLE
SECONDARY
RELIEF
RELIEF
PRIMARY
CLEARANCE
ANGLE
SECONDARY
CLEARANCE
ANGLE
CUTTING
EDGE
WEDGE
BLADE
DIRECTION OF
ROTATION
CHAMFER
FACE OF
CUTTER
WORKING DIAMETER
RELIEF
FLANGE FOR MOUNTING
ON SPINDLE NOSE
POSITIVE AXIAL
RAKE ANGLE
ENLARGED VIEWS OF BLADE
Figure 18E—Nomenclature of a Face Milling Cutter
HAND TAPS
Figure 18F—Sketch illustrating tap terms, as employed in Taps—Cut and Ground
Threads, American Standard B5.4-1948.
—33—