Kaba Saflok QuantumII MT RFID - User Manual

QuantumII
™
MT RFID Installation Instructions
All parts needed to install the QuantumII™ MT™ RFID lock are included with each unit. Please check to make
sure all parts are accounted for before beginning installation. Do not substitute any of the parts. The use of
substitute parts will result in poor performance of the lock.
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and intended
for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in legal action by
Computerized Security Systems dba SAFLOK and its parent company.
Proximity Reader Assembly
(A21710-COLOR)
Mortise (see Mortise Options table)
Scalp Plate
(51190-COLOR)
Outside Lever Trim
(A20970-HAND-COLOR)
Screw Pack
(A29070-COLOR)
Strike Plate
(30320-HAND-COLOR)
A70000-Handing
Mortise, 1-3/4
A70020-Handing
Mortsie, 1-3/4
ADB
A70080-Handing
Mortise, 1-3/4
ADB, DAJ2
A70060-Handing
Mortise, 1-3/4
STD, DAJ2
Mortise Options
Inside Trim Assembly
QCLXXXXXX-6--Color

Summary

Preparing the Door and Door Frame

Installing the Lock Trim

Testing Lock Functionality

SAFLOK Door Unit Inspection Criteria

Appearance Inspection

Check for blemishes and ensure straight mounting of lock body, scalp, and jamb strike.

Lock Functionality Checks

Verify knob/lever movement, dead bolt extension, latch engagement, and anti-pick features.

Electronics and Keycard Functionality

Test keycard recognition, LED indicators, and battery status for proper operation.

Door and Jamb Fitment

Ensure smooth door closing, interference-free dead bolt extension, and correct jamb spacing.

Kaba Saflok QuantumII MT RFID Specifications