Kaboodle 600mm corner wall cabinet User Manual

Wall fixing
(If necessary)
Tools you will need
To put your kaboodle kitchen cabinets together you will need the following tools.
Hardware included
EC DBA
stick on end
caps x 14
door
buffer x 4
shelf
support x 6
28mm
wood screws x 10
50mm
wood screws x 30
Things you need to know
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Tape
measure
Adjustable
square
65mm
wood screw
Clamps
(quick release)
Safety
gearPencil
Wall fixing
(If necessary)
step 1
Follow these
instructions to
build and attach
your cabinet.
• All cabinets will need to be attached to the wall using a
minimum of 8 gauge 65mm screws if you have a stud wall.
If your wall is concrete, brick or another surface ask your
hardware specialist for advice on the right fixing method.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
• For extra strength use exterior woodworking glue
when assembling cabinets.
• To help identify panels, counter sunk holes always
face outwards.
• All holes that aren’t already pre-drilled should be drilled prior
to screwing using a No 12 countersinking drill bit.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• If you have any questions, contact us on:
Australia: 1800 666 078 Monday to Friday between
8:00am and 6:00pm AEST, New Zealand: 0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email: info@kaboodlegroup.com.au
Spirit level
(900mm recommended)
p. 1Ver. 9
W-51627
600mm corner wall cabinet
Cabinet
stand

Kaboodle 600mm corner wall cabinet Specifications

General

Brand	Kaboodle
Model	600mm corner wall cabinet
Category	Indoor Furnishing
Language	English

Summary

General Information and Safety

Safety and Contact Information

Safety gear, contact numbers for Australia and New Zealand, and email address for inquiries.

Included Components and Tools

Included Hardware Components

Lists included hardware: wood screws, shelf supports, stick-on end caps, and door buffers.

Required Tools for Assembly

Lists tools needed: cordless drill, spirit level, tape measure, pencil, clamps, safety gear, square, and wall fixing.

Assembly Instructions

Cabinet Frame Assembly

Instructions for assembling the main cabinet frame by joining panels.

Shelf Installation

Steps for installing an adjustable shelf using shelf supports.

Installation and Care

Wall Attachment Method

Instructions and precautions for securely attaching cabinets to a stud wall.

Benchtop Clearance and Wall Fixing Advice

Advises on benchtop clearance and seeking advice for fixing to different wall substrates.

Cabinet Cleaning and Maintenance

Provides guidance on cleaning, maintenance, and avoiding damage to cabinet surfaces.

Customer Service and Contact

Details customer service contact numbers and email for inquiries and support.