Kaboodle corner base cabinet User Manual

Tools you will need
To put your kaboodle kitchen cabinets together you will need the following tools.
Hardware included
Pencil
Cordless drill with:
• Number 2 screw tip
• 4mm drill bit
• Number 12
countersinking drill bit
Tape
measure
Wall fixing
(If necessary)
Adjustable
square
Clamps
(quick release)
Safety
gear
28mm
wood screws x 25
door
buffer x 4
adjustable
legs x 5
stick on end
caps x 7
E FC DBA
90°
bracket x 2
H
flat
bracket x 1
I
14mm
wood screws x 6
65mm
wood screw
shelf
support x 8
50mm
wood screws x 39
G
step 1
Follow these
instructions to
build and attach
your cabinet.
Things you need to know
Spirit level
(900mm recommended)
p. 1Ver. 9
W-51608
• All cabinets will need to be attached to the wall using a
minimum of 8 gauge 65mm screws if you have a stud wall.
If your wall is concrete, brick or another surface ask your
hardware specialist for advice on the right fixing method.
• Make sure you leave plumbing and electrical work
to qualified trades people. Never try this yourself.
• For extra strength use exterior woodworking glue
when assembling cabinets.
• To help identify panels, counter sunk holes always
face outwards.
• All holes that aren’t already pre-drilled should be drilled prior
to screwing using a No 12 countersinking drill bit.
• Make sure you always use safety gear like a mask, ear muffs
and glasses when using tools.
• If you have any questions, contact us on:
Australia: 1800 666 078 Monday to Friday between
8:00am and 6:00pm AEST, New Zealand: 0800 522 663
Monday to Friday between 8:00am and 5:00pm NZST
or email: info@kaboodlegroup.com.au
900mm corner base cabinet

Kaboodle corner base cabinet Specifications

General

Brand	Kaboodle
Model	corner base cabinet
Category	Indoor Furnishing
Language	English

Summary

Getting Started: Kaboodle 900mm Corner Base Cabinet

Important Safety and Assembly Information

Key advice for safe assembly, including wall fixing, professional help, glue use, and panel orientation.

Included Hardware Components

List of hardware provided with the cabinet, such as screws, buffers, and brackets.

Tools Required for Assembly

Essential tools needed to assemble and install the kaboodle kitchen cabinet.

Cabinet Assembly and Installation Steps

Joining Cabinet Panels

Instructions on how to join the base, back, and side panels of the cabinet.

Installing Adjustable Feet

Guidance on setting the height of the adjustable feet to 145mm for cabinet installation.

Fixing Cabinets to the Wall

Procedure for securely attaching the assembled cabinet to a wall, noting stud fixing.

Cabinet Care and Maintenance

Cleaning and Protecting Kaboodle Cabinets

Advice on cleaning methods, recommended cleaners, and what to avoid to maintain cabinet surfaces.