Kaco Blueplanet Series - Network and Communication Settings; Setting IP Address and DHCP; Communication Protocol Setup; Date and Time Configuration

SETTING THE IP ADDRESS IN INVERTER ID
1) Go to Inverter Settings
2) Deactivate DHCP
3) Assign IP Address, Subnet Mask, Gateway and DNS Server either as mentioned on Logger or as per Site Ethernet Details.
SET COMMUNICATION PROTOCOL
In Network, Activate Modbus TCP and Set Port to 502 (Default) or as per site Ethernet Details
SET DATE & TIME OF INVERTER
For a precise calculation of the statistics in the inverter itself and in a monitoring system,
date and time have to be correct.
 Set correct IP ADDRESS

Set the Correct Date & Time