Kagan MegaTimer User Manual

MegaTimer™ Instruction Manual
Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
10
Time and Date
The Time and Date mode displays the time of the day, the day,
and the date. The Time and Date mode is the default mode. Other
modes will return to the Time and Date mode when not in use.
To View the Time and Date
Press the Time/Date button.
To Set the Time and Date
1. Hold down the Time/Date button until the top display
prompts, “SET HOUR.”
2. Use the Up and Down arrows to set the hour.
3. Each press of the Time/Date button accesses the next field to set in the
following sequence:
– Minutes, “SET MIN”
– Year, “SET YEAR”
– Month (blinks in top display)
– Day (blinks in top display)
– Stops blinking/sets
4. When the desired field is blinking, use the Up and Down arrows to set
the field.
(Tip: To accept the set time without cycling through each field, press any other
mode button.)
(Tip: In the set state, hold down the Start/Stop button to clear
the time to 12:00 AM.)

Kagan MegaTimer Specifications

General

Brand	Kagan
Model	MegaTimer
Category	Timer
Language	English