MegaTimer™ Instruction Manual
Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
11
Alarm
The Alarm mode allows the user to set a time for an
alarm to sound.
To View the Alarm
Press the Alarm button.
To Set the Alarm
1. Hold down the Alarm button until the top display
prompts, “SET HOUR.”
2. Use the Up and Down arrows to set the hour.
3. Press the Alarm button. The top display prompts, “SET MIN.”
4. Use the Up and Down arrows to set the minutes.
5. Press the Alarm button to accept the set alarm.
(Tip: In the set state, hold down the Start/Stop button to clear
the alarm to 12:00 AM.)
To Toggle Alarm On/Off
In the Alarm mode, press the Alarm button again. The alarm icon toggles on
and off and the top display alternates between “ALARM ON” and
“ALARM OFF.”
(Note: When the alarm is on, the alarm icon remains present in other modes.)
To Turn Off a Beeping Alarm
Once the alarm is beeping, it may be turned off by pressing the Stop button.
This returns the MegaTimer to the Time/Date mode.
(Note: The alarm will turn off automatically after 30 seconds.)
To Next Page
Loading...
General