MegaTimer™ Instruction Manual
Kagan Publishing • (800) 933-2667 • www.KaganOnline.com
7
Power Adapter
Power adapter operation requires DC 9V, 400MA power adapter, and 3.5mm tip
(not included).
To Use a Power Adapter
1. Plug the power adapter into an electrical outlet.
2. Plug the power adapter tip into the DC input on the bottom right side of
the MegaTimer (see diagram below).
Important Power Adapter Information
• Danger of electric shock.
• Power adapter should be plugged in and removed by an adult only.
• Use only the power adapter available from Kagan Publishing, (800) 933-2667,
www.KaganOnline.com, or equivalent.
• Using an incorrect or defective power adapter may damage your MegaTimer.
• Unplug the adapter from the MegaTimer prior to unplugging the adapter from
the wall.
• Regularly examine the power adapter for damage to the cord and/or plug.
• Do not attempt to use or repair a damaged power adapter.
• Discard a damaged power adapter immediately.
Power Adapter Diagram
Input
110V plug
Output
DC 9V, 400MA,
3.5mm tip
Powering Up
To Next Page
Loading...
General